We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Feeding device.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Feeding device×U.ENG - List of Manufacturers, Suppliers, Companies and Products

Feeding device Product List

1～11 item / All 11 items

Displayed results
HCS-100 Type Hybrid Cutting Fluid Automatic Supply Device

HCS-100 Type Hybrid Cutting Fluid Automatic Supply Device

This is the ultimate dream product for the parts processing industry, a solution that addresses all the various troubles associated with the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, we have a device that automatically generates cutting fluid with "far lower costs and higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is fully automated, requiring no manual intervention from operators. Moreover, the groundbreaking aspect of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the qualities of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, resulting in the entire factory being transformed into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement" is entirely eliminated, and the disposal of industrial waste has also ceased.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic Cutting Fluid Supply Device 【HCS-100 Type Automatic Cutting Fluid Replenishment Device】

Automatic Cutting Fluid Supply Device 【HCS-100 Type Automatic Cutting Fluid Replenishment Device】

The HCS-100 type automatic coolant replenishment system will enable the Japanese parts processing industry to achieve costs that are significantly on par with those of emerging countries.

Introducing a powerful equipment that supports Japan's parts processing industry, renowned for its processing precision: the U.ENG HCS-100 Hybrid Cutting Fluid Automatic Replenishment System. This "hybrid cutting fluid," which combines the properties of water-soluble and oil-based cutting oils, eliminates most of the drawbacks of both, allowing users to generate a dream-like cutting fluid that exhibits only the advantages. It replaces the conventional cutting fluid made of 10% cutting oil and 90% tap water with a 100% cutting fluid that performs better than ever before. Benefits include extended tool life, reduced processing time, no foam generation, no rust formation, no need for additional fluid, and no replenishment work for operators. Average tank capacity: 300L, dilution ratio: 20 times, number of tanks: 20. The annual cost difference between conventional equipment and the HCS-100 is a reduction of 5.5 million yen, totaling a 16.6 million yen reduction over three years. All manual replenishment work, new fluid, and additional fluid costs are eliminated. We also assist with the application procedures for 1/2 and 2/3 subsidies for eligible companies. For more detailed information, please contact U.ENG. We look forward to seeing further development in Japan's parts processing industry through cost reductions with this cutting fluid.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cost reduction (parts machining) hybrid cutting fluid automatic supply device

Cost reduction (parts machining) hybrid cutting fluid automatic supply device

The HCS-100 hybrid automatic replenishment system will enable the Japanese parts processing industry to achieve costs that significantly match those of emerging countries.

Introducing the powerful equipment that supports Japan's parts processing industry, renowned for its processing precision worldwide: the HCS-100 Hybrid Cutting Fluid Automatic Replenishment System. This "hybrid cutting fluid," which combines the properties of water-soluble cutting oil and oil-based cutting oil, eliminates most of the drawbacks of both, allowing users to generate a dream-like cutting fluid that exhibits only the advantages. It replaces the conventional cutting fluid, which consists of 10% cutting oil and 90% water, with a 100% cutting fluid that offers superior performance. Achieve over 50% annual cost reduction with no permanent spoilage or odor generation, extended tool life, reduced processing time, no foam generation, no rust formation, no need for additional fluid, and no replenishment work for operators. Average tank capacity: 300L, dilution ratio: 20 times, number of tanks: 20. The cost difference between conventional equipment and the HCS-100 model results in a reduction of 5.5 million yen annually, totaling 16.6 million yen over three years. All manual replenishment work, new fluid, and additional fluid costs are unnecessary. We also assist target companies with the application process for subsidies of 1/2 and 2/3. For more detailed information, please contact U.ENG. We look forward to seeing further development in the Japanese parts processing industry through cost reduction with this cutting fluid.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Productivity Improvement Product: Hybrid Cutting Fluid Automatic Supply Device

Productivity Improvement Product: Hybrid Cutting Fluid Automatic Supply Device

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300 watts, a few consumables, and tap water, this device automatically generates cutting fluid that is "far lower in cost and has higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automated, eliminating the need for any manual work by operators. Furthermore, the groundbreaking aspect of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid at performance levels equivalent to fresh fluid. [Patent applied for] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the properties of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, resulting in the entire factory being transformed into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to always keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "refilling cutting fluid has completely disappeared, and there is no longer any need for the disposal of industrial waste."

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Product for Reducing Production Costs: Hybrid Cutting Fluid Automatic Supply Device

Product for Reducing Production Costs: Hybrid Cutting Fluid Automatic Supply Device

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles associated with the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300 watts, a few consumables, and tap water, our device automatically generates cutting fluids that are "far lower in cost and have higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automated, eliminating the need for any manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at the level of fresh fluid at all times. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also incorporates the performance of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory transforms into a mist that disinfects bacteria, resulting in the entire factory becoming "odorless and healthy air." By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or reduced cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement" has become completely unnecessary, and the disposal of industrial waste has also been eliminated.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Factory Improvement Product HCS-100 Type Hybrid Cutting Fluid Automatic Supply Device

Factory Improvement Product HCS-100 Type Hybrid Cutting Fluid Automatic Supply Device

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, our device automatically generates cutting fluids that are "far lower in cost and have higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is "completely automatic," eliminating the need for any manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to "maintain the performance of the cutting fluid at the same level as new fluid." [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the performance of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, making the entire factory environment "odorless and healthy." By maintaining the "hybrid cutting fluid" with automatic correction to keep it at a new fluid state, there are no occurrences of tool breakage, rust, or reduced cutting speed due to fluid degradation, allowing operations to continue as if using entirely new fluid. Therefore, the need for "fluid replacement has completely disappeared, and there is no longer any need for the disposal of industrial waste."

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting fluid (coolant) anti-corruption hybrid cutting fluid automatic supply device

Cutting fluid (coolant) anti-corruption hybrid cutting fluid automatic supply device

This is the ultimate dream product for the parts processing industry, a solution that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a small power consumption of 300W, minimal consumables, and tap water, we have a device that automatically generates cutting fluid with "far lower costs and higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automatic, eliminating the need for any manual labor by operators. Furthermore, the groundbreaking aspect of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at the level of fresh fluid at all times. [Patent applied for] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the properties of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, turning the entire factory into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or reduced cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement is completely eliminated, and the disposal of industrial waste has also ceased.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Permanent sterilization, odorless cutting fluid (coolant) automatic supply device.

Permanent sterilization, odorless cutting fluid (coolant) automatic supply device.

For the parts processing industry, this is the ultimate dream product, a solution that addresses all the various troubles associated with the long-standing inconveniences of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, we have a device that automatically generates cutting fluid in-house, which offers "far lower costs" and "higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory transforms into a mist that disinfects bacteria, resulting in the entire factory becoming "odorless and healthy air." By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing it to operate continuously in a state equivalent to new fluid. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cost Reduction for Machine Tool Processing - Hybrid Cutting Fluid Automatic Supply Device

Cost Reduction for Machine Tool Processing - Hybrid Cutting Fluid Automatic Supply Device

The HCS-100 hybrid cutting fluid automatic replenishment system will enable the Japanese parts processing industry to achieve costs that are on par with those of emerging countries.

Introducing the powerful equipment, the HCS-100 Hybrid Cutting Fluid Automatic Replenishment System, which supports Japan's parts processing industry, renowned for its processing precision worldwide. This hybrid cutting fluid combines the properties of water-soluble cutting fluids and oil-based cutting oils, eliminating most of their drawbacks and showcasing only their advantages, allowing users to automatically generate this dream-like cutting fluid themselves. The conventional cutting fluid, consisting of 10% cutting oil and 90% water, is replaced by a 100% cutting fluid that offers superior performance. With over 50% annual cost reduction, there is no permanent spoilage or odor generation, extended tool life, reduced processing time, no foam generation, no rust formation, no need for additional fluid, and no replenishment work required from operators. Average tank capacity: 300L, dilution ratio: 20 times, number of tanks: 20. The cost difference between conventional equipment and the HCS-100 model results in a reduction of 5.5 million yen annually, totaling 16.6 million yen over three years. All manual replenishment work, new fluid, and additional fluid costs are unnecessary. We also assist companies with the application process for subsidies of 1/2 and 2/3. For more detailed information, please contact U.ENG. We look forward to the continued development of Japan's parts processing industry through cost reductions with this cutting fluid.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Production Factory Improvement Hybrid Cutting Fluid Automatic Supply System

Production Factory Improvement Hybrid Cutting Fluid Automatic Supply System

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300 watts, a few consumables, and tap water, we have a device that automatically generates cutting fluid with "far lower costs and higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is fully automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid at performance levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance characteristics of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, resulting in the entire factory being transformed into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manufacturing Subsidy: Hybrid Cutting Fluid Automatic Supply Device

Manufacturing Subsidy: Hybrid Cutting Fluid Automatic Supply Device

We can assist you with the subsidy application for this product, which is the ultimate dream product for the parts processing industry and solves the long-standing issue of cutting fluid costs. Would you consider it?

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, our device automatically generates cutting fluid that is "far lower in cost and has higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is "completely automatic," eliminating the need for any manual work by operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to "maintain the performance of the cutting fluid at levels equivalent to fresh fluid." [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the properties of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria and microorganisms in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria and microorganisms, turning the entire factory into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to the degradation of the cutting fluid, allowing it to operate continuously in a state equivalent to fresh fluid. Therefore, the need for "refilling cutting fluid has completely disappeared, and the disposal of industrial waste has also been eliminated."

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Feeding device

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.